* higher pressures and temperatures on request
** depending on size and speed
Type SC
single or multi-stage side channel pump with shaft seal, positioned horizontally
Q max: 32 m³/h [141 g.p.m.]**
H max: 600 m [1970 ft]**
operating pressure: 40 bar [580 psi]*
temperature: 180° C [356° F]*
Type SC is a single or multi-stage self-priming horizontal side channel pump. In addition to the self-priming side-channel pumps have the advantage due to their high pressure factor, to work at relatively low pressure levels more economical than conventional centrifugal pumps when conveying small flow rates.
Due to the axial suction supports and the upstream radial impeller, the Type SC achieves low NPSH values.
The steps are sealed against the atmosphere by chambered O-rings.
The pump shaft is mounted on the pressure side in a permanently grease lubricated roller bearing.
A diffuser is designed as a pressure maintenance stage, so that when switching off the pump still sufficient fluid remains in the pump to allow a smooth start even when operating with geodetic suction height.
- oil & gas
- chemistry
- petrochemistry
- tank storages / tank farms
- renewable energy / environmental engineering
Q max: 32 m³/h [141 g.p.m.]**
H max: 600 m [1970 ft]**
operating pressure: 40 bar [580 psi]*
temperature: 180° C [356° F]*
max rotational speed: 1750 min−1
gasket/mechanical seal: mechanical seal
installation: horizontal
self-priming: yes
bearing: rolling bearing
lubrication: grease
materials: duplex, Ni-based, spheroidal graphite iron / cast steel, austenitic steel
standards: ISO 5199
explosion protection: category 2 / zone 1
